- 1 General
- 1.1 This site is really cool; do I need to be a scientist to help out?
- 1.2 How many neurons are in the brain?
- 1.3 How many cells have we mapped?
- 1.4 What sort of cells are we working on?
- 1.5 How many cubes/hours does it take to complete one neuron?
- 1.6 Do multiple people work on each neuron?
- 1.7 Why can't I work on my own neuron?
- 1.8 Can I see the cube I just did?
- 1.9 Can someone help me with this piece?
- 1.10 What happened to my progress bar? Why don't I get a percentage score anymore?
- 1.11 If EyeWire can tell me what I got wrong why do I need to be doing this?
- 1.12 If the computer can fill in the neurons to the extent that we see in the tasks on EyeWire, why can't it do everything/why are there holes?
- 2 Points
- 3 How to
- 4 What is This?
- 5 Problems
- 6 Other Ways to Help
This site is really cool; do I need to be a scientist to help out?
Nope! No specialized knowledge is required, but being curious, observant and clever will be helpful.
How many neurons are in the brain?
It's estimated that there are 100 billion neurons in the brain.
How many cells have we mapped?
The exact number of cells we have mapped will continue to increase, but if you look at the overview here you can see what we've been working on recently.
What sort of cells are we working on?
Currently we are reconstructing ganglion cells. These neurons are the outputs of the retina, sending their axons through the optic nerve to the brain. Just recently we've reconstructed two J cells
How many cubes/hours does it take to complete one neuron?
The answer is complicated, but it's safe to say there are a couple of thousand cubes needed to complete one neuron, and remember that each task is done by several different users. The number of tasks will change from cell to cell because they may be different sizes.
Do multiple people work on each neuron?
Yes, multiple people work on each cube. We do this to promote accuracy, each individual result is compared and then the AI decides the correct answer.
Why can't I work on my own neuron?
It would take you a very long time to complete one cell all by yourself. Also, having many people complete each cube helps increase accuracy (even experts occasionally miss something). If you were all on your own it'd be very easy to miss something or add something incorrectly. Having several sets of eyes, and the comparing capabilities of the AI help make sure mistakes are caught, and allows us to award points. See the points section for more information on how points are awarded.
Can I see the cube I just did?
Sort of. If you go here eyewire.org you can see the cells we're working on here. You can see the pieces you've worked on by clicking on your name.
Can someone help me with this piece?
Yes, but you've got to catch one of the admins while you're still in the problematic cube. Try the chat feature and ask if one of us can help you see what's going wrong/right. Another thing you can do is take a screen shot of the problematic piece (try to position the piece in 2D and 3D so we can see the problem, and post it here in the forum. Other EyeWirers will help you figure out what the problem is.
What happened to my progress bar? Why don't I get a percentage score anymore?
Congratulations, you've finished the tutorial! After you finish the lessons in the tutorial there are several more training tasks that give you a progress bar and a percentage score. After you've finished the tutorial we can't give you a percentage of how accurate you were or a progress bar because we don't know the answer. You're helping us put together cells that have never been put together before.
If EyeWire can tell me what I got wrong why do I need to be doing this?
EyeWire can only tell you that you've made mistakes during the tutorial. After that you're working on stuff that hasn't been done before, so we don't know the answer. The points you get after the tutorial are based off of the time you spent on the cube, and how your results compare to your fellow EyeWirers.
If the computer can fill in the neurons to the extent that we see in the tasks on EyeWire, why can't it do everything/why are there holes?
The artificial intelligence (AI) used by Eyewire isn't perfect. It's making its best guess as to what belongs and what doesn't. By guiding the AI you are actually helping it learn to do better so there will be fewer holes in the future.
Is it a computer or a person who decides the correct answer and the points?
The computer compares the results from several different people; it then decides the correct answer.
How are points decided?
There are two parts to each score. The first is dependent on how long you took to do the task. If you get a new task and immediately click done, you will get zero points for that part of your score. This way you will get more points for the harder tasks that take longer. It should be noted that the number of points you can earn for time spent are limited. In other words don't just leave your browser open overnight on a task to earn points. It won't work. The second part of your score comes from how accurately you did the task based on how everyone else did it.
Did the scoring system change?
Yes, your score used to based solely off how accurate your work was compared to everyone else. Now it's based on how accurate you work is compared to everyone else and how much time you spent on a piece. I liked the feedback I got during the training section when I selected something incorrectly. Why don’t I still get feedback as I’m working? We can’t give you feedback before you complete a task because we don’t know the answer. For accuracy it’s also important that we have several people independently complete each task; giving feedback as you work would undermine that.
Why did I get zero points?
Zero points are awarded if you didn't add anything and didn't scroll through the task at all, or you made a significant error. What is a trailblazer/how many points do they get? The trailblazer is the first one to do a task. You don't get points as a trailblazer because we can't give you points based on accuracy because the AI doesn't have anything with which to compare your work. Everyone is the trailblazer sometimes, so the points will eventually even out.
How do I select something?
Click on it in the 2D. To deselect either right click in the 2D, or Ctrl+click in the 3D.
How do I know when I am done with a piece?
There are a couple different things that will indicate you have finished the piece. If you've scrolled through the entire piece, and haven’t found anything else to add, you're off to a good start.
Now look at the 3D; are their any jagged outcroppings or rough spots? If so you'll want to go back and double check; there may be something missing.
Something else to keep in mind, did the piece go from one side of the cube to the other? Usually the piece you're working on should cross the boundary of the cube at least twice.
How to use the 3D
To change the orientation of the piece in the 3D, click and drag anywhere in the 3D. To zoom, click inside the 3D view and use your mouse or the touch pad on your computer to scroll in and out. To pan in 3D right click and drag. The gray plane represents the slice you see in the 2D view. To alter the position of the plane, double click and drag it with your cursor.
What is This?
I just got a huge piece that fills up most of the 3D, what is it?
Sounds like you've encountered a cell body. We try to eliminate these from the task queue but they do pop up from time to time. Please focus on the missing pieces at the edge of the cube, but don't spend more than five minutes on these cubes.
I just got a really small piece. There wasn't anything that needed to be added, is that ok?
Yep, that’s ok. Those small tasks are annoying and we're working on getting rid of them. Look forward to never seeing another small chunk again in the next week or two.
Eyewire gave me two pieces that are stuck together
Sounds like you've found a merger. The AI that guides Eyewire is good, and constantly improving, but not perfect. Once in a while it does stick two things together that do not belong. There's no way to tell which one you were intended to do, so please skip the task if you can't figure out which is the correct piece.
I think there's a problem with the site.
You can report a bug in the forum by starting a new discussion about the problem. Before you do that, check to see if someone else has already started a discussion about the same problem; if so +1 their post and add your comments there. When we've resolved the issue, please let us know that the issue is fixed so we can close the thread.
When I log onto the play site it says that my browser isn't supported. Why, what should I be using?
Currently the only supported internet browsers are Chrome, Firefox and Safari. First you should make sure you are using the most recent version of one of the aforementioned browsers. If you are indeed using a supported browser and are still having trouble there are a couple of things it could be. Go here for more helphttp://wiki.eyewire.org/en/WebGL
Why can't I just use Internet Explorer?
Unfortunately IE does not support a necessary application: WebGL. Providing you with the interactive 2D and 3D graphics that make Eyewire exciting (and easier to use) is a cutting edge capability for a web browser, and we were only able to deliver it using a new software library called WebGL (http://en.wikipedia.org/wiki/WebGL). Every major web browser, except IE supports WebGL. Microsoft has no plans to support WebGL, so we expect this problem with IE to be permanent. EyeWire works with all other major browsers. However, you may need to upgrade to the latest version if you have an old one.
Can I play on my ipad/iphone/tablet?
Currently EyeWire is not supported on any tablets or smart phones.
How do I turn off the chat?
There's not currently a way to opt out of the Chat feature. We are working on it and will have it up soon. To mute the chat feature click on the speaker icon in the lower right corner of the screen.
Other Ways to Help
How else can I help?
You can help us spread the word about EyeWire, the more users we have the better we'll become and the more science we'll be able to do. You can help answer new EyeWirers' questions in the forums and in the chat. You can help us look for mergers in the overview (make sure to post a screen shot in the forum so we can find it).
If you've got a particular skill you think might benefit our cause we'd love to hear about it. We would love some help editing this wiki, to make it more comprehensive and to make it more accessible to people without science backgrounds.
As the community continues to grow more opportunities will pop up. Feel free to suggest something!
I have a great idea for a new feature, who do I tell?
Post your ideas in the forum. Check first to see if another person has requested the same thing, and if so +1 their idea or comment in that thread.